Snow on Solar Panels: Should You Clear Them This Winter?
Snow costs Alberta solar systems less than you might think. Here is what the research shows and how to clear panels safely when it is worth it.

Snow on solar panels costs a typical Alberta home far less energy than most people expect. Multi-year research from NAIT in Edmonton measured annual losses of roughly 3 per cent, and for most grid-tied systems on a pitched roof, the safest and most economical choice is to let the snow slide off on its own. This guide explains what the data shows, when clearing is worth the effort, and how to do it without damaging your panels or putting yourself at risk.
How Much Energy Does Snow on Solar Panels Actually Cost?
The best Canadian data on this question comes from the Northern Alberta Institute of Technology. NAIT’s Alternative Energy Technology program built a solar reference array in Edmonton in 2012 and studied it for five years, with modules mounted at a range of tilt angles from shallow to fully vertical. Some modules were cleared after every snowfall and others were left alone, so the team could measure the difference directly.
The result surprised many people in the industry. NAIT reported that snow reduced annual energy production by only about 3 per cent, compared with a long-standing industry assumption of around 20 per cent. The reason is simple once you look at the calendar. Alberta’s darkest months, when snow is most persistent, are also the months when the sun is lowest and days are shortest. Those months contribute a small share of a system’s yearly output, so losing part of that production has a modest effect on the annual total.
Roof Pitch Makes the Biggest Difference
Steeper panels shed snow faster. Solar Alberta’s summary of the NAIT reference array data shows how much extra energy the cleared modules produced compared with the uncleared ones, over the April 2012 to March 2015 period.
| Module tilt | Typical example | Extra annual energy from clearing |
|---|---|---|
| 14° | Low-slope roof (about 3/12 pitch) | 5.28% |
| 18° | Common 4/12 residential roof | 5.31% |
| 27° | Common 6/12 residential roof | 4.14% |
| 45° | Steep roof or ground mount | 1.99% |
| 53° | Steep ground mount | 1.63% |
To achieve those gains, the NAIT team cleared the test modules about 24 times per winter. Solar Alberta’s data also notes that a module mounted vertically at 90° stayed free of snow for 99.5 per cent of the winter. For a typical home on a 4/12 to 6/12 roof, two dozen trips with a roof rake would recover roughly 4 to 5 per cent of a year’s production. For most households, that is not worth the time or the risk.
Why Solar Panels in Winter Often Perform Better Than Expected
Several factors work in favour of solar panels in winter, even on the Prairies.
- Cold improves efficiency. Solar cells convert light to electricity more efficiently at low temperatures. Datasheets express this as a temperature coefficient. For example, JA Solar’s JAM72D40 N-type TOPCon module lists a power temperature coefficient of -0.29%/°C, which means output rises slightly for every degree the cells run below the 25°C test condition.
- Panels shed snow on their own. Tempered glass is smooth, and the dark cells absorb whatever light passes through a thin layer of snow. As the module warms, the bottom layer melts and the rest slides off, often within a day or two of a sunny spell.
- Snow reflects light. A bright snow cover on the ground reflects sunlight back toward the array. Bifacial panels, which produce power from both faces, can capture some of that reflected light on the rear side, particularly on ground mounts with good clearance.
- Clear Prairie skies. Alberta receives a lot of sunshine through the winter compared with many other parts of Canada, so the days that are clear produce meaningful energy.
For a location-specific view of monthly production, Natural Resources Canada publishes photovoltaic potential maps covering more than 3,500 municipalities, with estimates for each month and several array orientations.
When Clearing Snow Is Worth It
The NAIT findings apply most directly to grid-tied systems on pitched roofs, where a few weeks of reduced winter output is averaged across a full year of production. Some systems depend more heavily on winter output, and for those, clearing can make sense.
Off-Grid Cabins, Acreages and Farms
An off-grid system has no utility to fall back on. If a battery bank is sized for two or three days of autonomy and a storm buries the array for a week, the generator will run until the panels are clear. In this situation, a few hours of solar harvest in December has real value. Off-grid owners should also keep their batteries within their rated charging temperature range. Our self-heating lithium battery guide explains how heated LiFePO4 batteries handle cold-weather charging.
Ground Mounts and Low-Tilt Arrays
A ground-mounted array that you can reach safely from the ground is the easiest system to clear. Low-tilt and flat-roof arrays hold snow the longest, and NAIT’s researchers noted that clearing is more reasonable on flat commercial roofs. If snow sliding off a ground mount piles up against the bottom edge, it can hold the next snowfall in place, so leaving clearance below the lowest row helps the array keep shedding all winter.
How to Remove Snow From Solar Panels Safely
If you decide to clear your panels, protect yourself first and the equipment second. Never climb onto a snowy or icy roof to clear panels, and do not walk on modules under any circumstances. Manufacturers such as Canadian Solar state this directly in their installation manuals, because concentrated loads can cause micro-cracks in the cells that are invisible from the outside but reduce output over time.
- Work from the ground. Use a long-handled roof rake or brush designed for solar panels, with a soft foam or bristle head and no metal edges.
- Use a soft brush only. Canadian Solar’s installation manual specifies that snow should be removed using a soft brush, and warns against scraping, which can cause micro-scratches in the glass.
- Leave a thin layer. Do not try to scrape the glass clean. Once most of the snow is off, the sun will melt the rest.
- Leave ice alone. Do not chip at ice, pour hot water on frozen glass, or use de-icing salt or chemicals. These can damage the glass, frame seals or coating, and may affect your warranty.
- Mind the drop zone. Snow clears off panels in a sudden sheet. Keep people, pets and vehicles away from the eaves below the array while you work.
If your panels are out of reach, the practical answer is to wait. Hiring a contractor to clear a residential roof rarely pays back in recovered energy, which was one of NAIT’s conclusions as well.
Planning for Snow Load and Sliding Snow
For new systems, the more important winter question is structural. Panels and racking must be rated for the snow and wind loads at your location. Many current residential and commercial modules carry a front-side load rating of 5,400 Pa, and the racking, attachments and roof structure must be designed for the loads your local building code requires. Your installer and, where required, an engineer will confirm this during design and permitting.
Snow Guards Below the Array
Because glass is so slippery, panels can release a large sheet of snow at once. Over an entrance, a walkway, a deck or a lower roof, that is a real hazard. Snow retention installed below the array holds snow in place and lets it melt gradually. On standing seam metal roofs, clamp-on systems such as the S-5! ColorGard 2.0 snow guard system attach without penetrating the roof. You can see the full range in our snow retention category.
Checking Your System’s Winter Production
Low winter numbers in your monitoring app are normal. The useful comparison is between a clear day with clean panels and a clear day with snow cover. If your array stays snow-free in sunny weather but output is much lower than on similar days earlier in the winter, look for a fault rather than blaming the weather. Our guide to solar system maintenance and monitoring covers what to check and when to call your installer.
Frequently Asked Questions
Should I remove snow from my solar panels?
For most grid-tied systems on a pitched roof, no. NAIT’s five-year study in Edmonton found snow costs about 3 per cent of annual production, and the panels clear themselves after a few sunny days. Clearing makes more sense for off-grid systems and for ground mounts you can reach safely from the ground.
Do solar panels work in winter in Alberta?
Yes. Panels produce less in winter because the days are shorter and the sun is lower, but cold temperatures improve cell efficiency and Alberta has many clear winter days. Production picks up quickly once the days lengthen in late winter and spring.
Can snow damage solar panels?
Snow on its own does not damage properly installed panels that are rated for the local snow load. Damage usually comes from people, through walking on modules, scraping the glass with metal tools or chipping at ice. Heavy snow is a structural design consideration, which is why racking and attachments are engineered for local loads.
Do solar panels melt snow?
Panels are not heated, but they help snow melt faster than a regular roof. Sunlight passing through a thin snow layer warms the dark cells, the bottom layer melts, and the smooth glass lets the rest slide off. Steeper panels clear fastest.
What is the best way to get snow off solar panels?
From the ground, using a long-handled roof rake or brush with a soft foam or bristle head. Remove the bulk of the snow, leave a thin layer for the sun to melt, and leave any ice in place. Never go onto a snowy roof to clear panels.
Build a System Ready for Canadian Winters
A well-designed array handles an Alberta winter with very little attention. If you are planning a new system, browse our solar panels and snow retention products, and talk to a qualified local installer about tilt, snow load and clearance for your site. For help choosing equipment for a home, acreage, farm or cabin, contact the Circuit Solar team.




