Inspeed Display Kits, comprehensive kits designed to display wind speed data from anemometers, featuring easy-to-read screens and compatible with various Inspeed sensors for accurate wind monitoring.

Special Order

Inspeed – Display Kits

Brand: Inspeed LLC

SKU: N/A

$49.00

Special Order

Inspeed’s Display Kits allow you to see the current, max, and average wind speeds for Inspeed Reed Switch Anemometers.

Features You’ll Love:

Low cost
Auto-on (wind is blowing), Auto-off (no wind)
High speed updates (1 second or less)
Max and Average speeds captured until the user resets them
Virtually unlimited wire length with no effect on accuracy or performance

Max Speed

Wire Termination

Clear

Inspeed Anemometer Display Kits

We use bicycle speedometers for our display kits – for a few reasons:

They have dual, simultaneous displays:
- 1: The current, instantaneous live wind speed
- 2: Options for Max, Average, and other readings
They are inexpensive
They are high quality
They are battery powered, with auto-on and auto-off features to make the battery last as long as possible
They update quickly – at least once per second, higher at high speeds
The wire can be made very long (hundreds of feet) with no effect on accuracy or performance

…to name a few. The display kits include the following:

The LCD display, calibrated to mph (can be calibrated to mph, kph, or knots – under certain conditions)
The display mounting bracket, with high strength mushroom tape attached to the back
Wires stripped and ready for attachment to the wind sensor, or, as an option, with a 1/8″ jack connection for certain models
An extra piece of self-adhesive mushroom tape to attach wherever you want to mount the display
The display instructions (so you can access/set other functions if you want)

We currently offer 2 models:

The Cateye Velo7 – which is limited to 125 mph, and

The Sigma Sport MC10 – which works up to 200 mph

The display kits are available with bare wires or, optionally, a 1/8″ jack connection (for use with the Inspeed Mag Mount or Flexwire anemometers).

NOTE: the display kits are designed for use with INSPEED REED SWITCH anemometers. The Hall sensor anemometers require external power to work (not included).

NOTE2: take care when observing the Average Wind Speed; for cycling, the average speed calculations stop when the wind speed is below 1 mph, so the Average will be incorrect if there were periods of no wind. There is a work-around – see the instructions!