Inspeed – Display Kits

Inspeed Anemometer Display Kits

We use bicycle speedometers for our display kits – for a few reasons:

• They have dual, simultaneous displays:
  • 1: The current, instantaneous live wind speed
  • 2: Options for Max, Average, and other readings
• They are inexpensive
• They are high quality
• They are battery powered, with auto-on and auto-off features to make the battery last as long as possible
• They update quickly – at least once per second, higher at high speeds
• The wire can be made very long (hundreds of feet) with no effect on accuracy or performance

…to name a few.  The display kits include the following:

• The LCD display, calibrated to mph (can be calibrated to mph, kph, or knots – under certain conditions)
• The display mounting bracket, with high strength mushroom tape attached to the back
• Wires stripped and ready for attachment to the wind sensor, or, as an option, with a 1/8″ jack connection for certain models
• An extra piece of self-adhesive mushroom tape to attach wherever you want to mount the display
• The display instructions (so you can access/set other functions if you want)

We currently offer 2 models:

The Cateye Velo7 – which is limited to 125 mph, and

The Sigma Sport MC10  – which works up to 200 mph

The display kits are available with bare wires or, optionally, a 1/8″ jack connection (for use with the Inspeed Mag Mount or Flexwire anemometers).

NOTE:  the display kits are designed for use with INSPEED REED SWITCH anemometers.  The Hall sensor anemometers require external power to work (not included).

NOTE2:  take care when observing the Average Wind Speed; for cycling, the average speed calculations stop when the wind speed is below 1 mph, so the Average will be incorrect if there were periods of no wind.  There is a work-around – see the instructions!